- 免費版最多可以使用 10 個 Sensor（Free for personal and commercial use and limited to 10 sensors.）。
- PRTG Traffic Grapher 與 PRTG Network Monitor 的比較（Do I need PRTG Traffic Grapher or PRTG Network Monitor?）。
- 我需要購買哪一種授權？授權以您要使用多少個 Sensor 來判別（有 25、100、500、1000 及無限個 Sensor 的授權）。 （Which license do I need?）
- 原廠知識庫。
- 試用版限制：30 天、500 個 Sensor、2 個 Netflow Sensor，超過 30 天將變成免費版的功能。
- 試用版下載：PRTG Network Monitor、PRTG Traffic Grapher
- 免費索取試用序號：PRTG Network Monitor、PRTG Traffic Grapher
PRTG Traffic Grapher 系統需求：
Version 6.x of PRTG Traffic Grapher requires the following basic system configuration:
- Windows 2000/XP/2003/Vista/2008 (32bit and 64bit)
- Running PRTG 6 on Windows 7 and 2008 R2 is not officially supported. It works except for packet sniffing. Please use PRTG 7 if you need packet sniffing on Win7 / 2008R2
- 256 MB RAM (512 MB and more recommended)
- 20 MB disk space for installation
- between 25kb and 300kb disk space per sensor per day for the monitoring data database
- TCP/IP Network Connection
To access the web interface one of the following web browsers is required (others may also work but have not been tested):
- Internet Explorer 6.0 or later
- FireFox 1.0 or later
For SNMP Monitoring: The monitored device(s) must be equipped with SNMP Version 1, 2c or 3 (or an SNMP software must be installed on the device). SNMP must be enabled on the device and the machine running PRTG must be allowed access to the SNMP interface.
For Netflow Monitoring: The device must be configured to send NetFlow data packets (NetFlow Version 5) to the machine running PRTG and a Netflow Collector must be set up in PRTG.
For Packet Sniffing: Only data packets passing the local machine’s network card can be analyzed. For cross-network monitoring in switched networks the use of switches with so-called “monitoring ports” is necessary. See the manual for detailed information.
螢幕擷圖：
沒有留言:
張貼留言