Backing Up Your Serv-U 7.x Settings
By default Serv-U stores all Domain and Server settings the Serv-U.Archive file and the Users folder. To back up your settings, make a copy of these the .archive file and a copy of the Users folder and store them on a remote drive or disk. When you install Serv-U on a new server, or in the case of data loss, simply reinstall Serv-U, shut it down, then copy the .archive file and Users folder into your installation directory to restore your settings as they were at the time of backup. These files are normally located in C:\Program Files\RhinoSoft.com\Serv-U\.
If you are using FTPS, SFTP, or have registered your software using the Serv-UID.txt file you will need to back up additional files along with the above basic configuration files. You'll need to back up the following files:
* Any file ending with .crt
* Any file ending with .pem
* Any file ending with .key
* The Serv-UID.txt file
The Serv-UID.txt file will be located in your installation directory if present, but the other files may be located elsewhere on your system. The best way to verify whether you are using these files is to check the Domain Limits & Settings | Encryption (for each domain) and Server Limits & Settings | Encryption tab to see where those files are stored.
Backing Up Your Serv-U 3.x-6.x Settings
By default Serv-U 6.x stores all Domain and Server settings in the ServUDaemon.ini and ServUAdmin.ini files. To back up your settings, make a copy of these files and store it on a remote drive or disk. When you install Serv-U on a new server, or in the case of data loss, simply reinstall Serv-U 6.x, shut it down, copy the .ini files into your installation directory to restore your settings as they were at the time of backup. These files are normally located in C:\Program Files\RhinoSoft.com\Serv-U\.
If you have selected to store any of your domains in the Windows registry then also export the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Cat Soft\" for backup. To move Serv-U to a new PC import this registry branch in the new PC's registry.
Backing Up Your Serv-U 2.5x Settings
By default Serv-U 2.5x stores all Domain and Server settings in the Serv-U.ini file. To back up your settings, make a copy of this file and store it on a remote drive or disk. When you install Serv-U 2.5x on a new server, or in the case of data loss, simply reinstall Serv-U 2.5x, shut it down, copy the .ini file into your installation directory to restore your settings as they were at the time of backup. These files are normally located in C:\Program Files\Serv-U\.
NOTE: Before backing up the file open it and making sure that your settings are there. This confirms what settings you are backing up. You should see all the server settings stored here.
Reference:
http://rhinosoft.com/Knowledgebase/KBArticle.asp?RefNo=1047∏=su
2009-01-22
2009-01-16
[PGP] Lotus Notes 設定問題
當您要傳送郵件時出現錯誤訊息：「作業因您的要求而停止：mail.box」，導致 Lotus Notes 無法送信！
可能的解決方式有下列三種：
方法一、啟用「Passphrase 密碼」儲存的功能：
P.S. 如果您的郵件用戶端是 Lotus Notes，則都必須啟用這個密碼儲存功能才能夠正常傳送郵件，我們測試過最高版本是 PGP Desktop 9.8.0 + IBM Lotus Notes 7.0.1，運作正常！
官方英文設定說明如下：
1. Click the PGP Tray icon, then click Options (the PGP Options should appear).
2. On the General tab, select one of the following options in the My Passphrase section:
* Save my passphrase for the current Windows session only
* Save my passphrase for x minute(s)
3. If you chose the latter option, set the desired time for passphrase saving (remember that the time must be one second or higher).
4. Click OK to save the change and close PGP Options.
At this point, try sending email with Lotus Notes. If the issue and errors were caused by not saving passphrases, your email should now be sent successfully.
來源：Lotus Notes Errors: "Operation stopped at your request: mail.box" OR "Operation stopped by user: mail.box"
方法二、檢查notes.ini是否正常
notes.ini通常位於「C:\Program Files\lotus\notes\notes.ini」，請開啟notes.ini並檢查是否有下列兩行文字（若無，則請自行加入）：
EXTMGR_ADDINS=nPgpOvid.dll
NSF_HOOKS=nPgpOvid.dll
方法三、檢查nPgpOvid.dll是否遺失
「notes.ini」所在資料夾應該也要有一個「nPgpOvid.dll」，如果沒有，請從「C:\Program Files\PGP Corporation\PGP Desktop\nPgpOvid.dll」複製一份過去。
來源：https://pgp.custhelp.com/cgi-bin/pgp.cfg/php/enduser/std_adp.php?p_faqid=769&p_created=1189620802
Lotus Notes: PGP Desktop does not proxy Email - PGP Desktop 10
注意：
1. 一台電腦收發兩個帳號，必須同時擁有兩把金鑰。
2. 當找不到收件者公鑰時，也會出現此錯誤訊息（有時不會出現紀錄）。
可能的解決方式有下列三種：
方法一、啟用「Passphrase 密碼」儲存的功能：
P.S. 如果您的郵件用戶端是 Lotus Notes，則都必須啟用這個密碼儲存功能才能夠正常傳送郵件，我們測試過最高版本是 PGP Desktop 9.8.0 + IBM Lotus Notes 7.0.1，運作正常！
官方英文設定說明如下：
1. Click the PGP Tray icon, then click Options (the PGP Options should appear).
2. On the General tab, select one of the following options in the My Passphrase section:
* Save my passphrase for the current Windows session only
* Save my passphrase for x minute(s)
3. If you chose the latter option, set the desired time for passphrase saving (remember that the time must be one second or higher).
4. Click OK to save the change and close PGP Options.
At this point, try sending email with Lotus Notes. If the issue and errors were caused by not saving passphrases, your email should now be sent successfully.
來源：Lotus Notes Errors: "Operation stopped at your request: mail.box" OR "Operation stopped by user: mail.box"
方法二、檢查notes.ini是否正常
notes.ini通常位於「C:\Program Files\lotus\notes\notes.ini」，請開啟notes.ini並檢查是否有下列兩行文字（若無，則請自行加入）：
EXTMGR_ADDINS=nPgpOvid.dll
NSF_HOOKS=nPgpOvid.dll
方法三、檢查nPgpOvid.dll是否遺失
「notes.ini」所在資料夾應該也要有一個「nPgpOvid.dll」，如果沒有，請從「C:\Program Files\PGP Corporation\PGP Desktop\nPgpOvid.dll」複製一份過去。
來源：https://pgp.custhelp.com/cgi-bin/pgp.cfg/php/enduser/std_adp.php?p_faqid=769&p_created=1189620802
Lotus Notes: PGP Desktop does not proxy Email - PGP Desktop 10
注意：
1. 一台電腦收發兩個帳號，必須同時擁有兩把金鑰。
2. 當找不到收件者公鑰時，也會出現此錯誤訊息（有時不會出現紀錄）。
2009-01-15
PGP離線註冊(9.x版以前)
1.點選Download Source網址進入專屬帳戶（請參考下圖紅框框處）
2.進入帳號後，將網頁拉至中間並點選「Register」
3.將您的基本資料輸入，並按下Save。（PS：如您此處原本就有資料，請直接觀看步驟4）
4.此時會出現2個按鈕，請您點選「Troubleshoot License Registration」此按鈕
5.請點選「Request Manual Authorization」此離線註冊按鈕。
6.閱讀完中間原廠的規定後按下下方「I agree」我同意的按鈕。
7.請將下列紅框框處所有內容全部複製下來。
8.此時請回到PGP上點選「Enter a License Auth…..」此選項，並按下下一步（此畫面在網路連線失敗時才會出現）。
9.將步驟7中所複製下來的文字貼至中間空白處，並按下下一步即完成註冊。
2.進入帳號後，將網頁拉至中間並點選「Register」
3.將您的基本資料輸入，並按下Save。（PS：如您此處原本就有資料，請直接觀看步驟4）
4.此時會出現2個按鈕，請您點選「Troubleshoot License Registration」此按鈕
5.請點選「Request Manual Authorization」此離線註冊按鈕。
6.閱讀完中間原廠的規定後按下下方「I agree」我同意的按鈕。
7.請將下列紅框框處所有內容全部複製下來。
8.此時請回到PGP上點選「Enter a License Auth…..」此選項，並按下下一步（此畫面在網路連線失敗時才會出現）。
9.將步驟7中所複製下來的文字貼至中間空白處，並按下下一步即完成註冊。
2009-01-14
2009-01-12
ActiveXperts SMS Messaging Server 亂碼問題修正
ActiveXperts SMS Messaging Server 5.0 建立 HTTP Channel 的問題，當您建立 HTTP Channel 時，如果發送 Unicode 中文碼時，SMS 送出訊息並非 Unicode 碼，這是 ActiveXperts SMS Messaging Server 的 BUG。
解決方案：
1. 下載官方提供的修正檔：AXmsCtrl.zip。
2. 解壓縮後置於：「C:\Program Files\Common Files\ActiveXperts」
解決方案：
1. 下載官方提供的修正檔：AXmsCtrl.zip。
2. 解壓縮後置於：「C:\Program Files\Common Files\ActiveXperts」
2009-01-09
如何避免MDaemon因誤判而刪除加密的壓縮檔
1. 下拉式選單：【Security】→【Content Filter】→【AntiVirus】
2. 取消勾選：「Quarantine messages that cannot be scanned」
V9.X版
V10.X版
2. 取消勾選：「Quarantine messages that cannot be scanned」
V9.X版
V10.X版
2009-01-08
MDaemon Email Server舊版下載（全版本）
如果您有下載舊版MDaemon的需求，可以連結到下列官方網址：
http://archive.altn.com/MDaemon/Archive/
軟體購買：
http://shopping.ahasoft.com.tw/index.php?manufacturers_id=10